No matter what equipment is used, we should know its operation method in time before using it. Only the correct operation method can use the equipment properly. The following is the operation method of the weight selection nickname:

1, clean the scale body

Cut off the power and unplug the power cord. Soak the gauze and wring it dry, then dipped a little neutral cleaning liquid, and use it to clean the weighing pan, display filter and other parts of the weighing body. Note: Do not use any chemical solvents for cleaning. Avoid splashing water into the scale body during the cleaning process. If splashing into the scale body accidentally, you must wait for the water to dry before turning on the power, otherwise it may cause electric shock. Or damage the weight to choose another name.

2, level correction

Check whether the scale body is normal. If it is tilted, please adjust the feet of the scale so that the blisters are in the center position.

3, clean the printer

Cut off the power supply for the alternative name of the weight, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body.

4, initialization

The barcode electronic scale has the functions of zero-tracking and zero-clearing at power-on, which can clear foreign objects on the weighing pan after power-on, and ensure that the scale is powered on when there is no wind around. If there is a little weight display after power-on, you can press the "clear" key on the keyboard to enable The scale returns to the zero position. During the weighing process, ensure that no foreign matter around the scale touches the weighing pan, and the bottom of the weighing pan must also be clean and free of foreign matter, otherwise it may cause problems such as inaccurate weighing.