What are the common faults of the filling machine?

Recently, some netizens asked me, what are the common faults of the filling machine? Today I will explain this problem in detail for you, so that when you encounter a fault when using the filling machine, you know how to quickly troubleshoot it.

1. The filling volume of the filling machine is inaccurate or not discharged:

1. Whether the speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed.

2. Is there any foreign matter in the quick-installation three-way control valve? If so, please sort it out.

If there is air, try to cut or sweep it away.

3. Check whether all sealing rings are damaged, if damaged, please replace them with new ones.

4. Check whether the spool of the filling nozzle is jammed or delayed to open. If there is a jam, the spool must be reinstalled. If the opening is delayed, adjust

Thin cylinder throttle valve.

5. Tighten the elastic force of the helical spring up and down in the quick-installation three-way control valve, if the elastic force is too large, the check valve will not open.

6. Whether the filling speed is too fast, adjust the filling speed throttle valve to reduce the filling speed.

7. Whether all clamps and leather tube buckles are sealed well, and if so, please correct them.

8. The magnetic switch is not loose, please lock it after adjusting the amount each time.

Second, the filling machine material from the rear end of the material tank has the following reasons:

1. Is the material tank in the center of the material tank bracket? If there is any abnormal movement of the material tank, please reinstall the position.

2. Whether the piston and piston rod of the material cylinder are fastened, please lock them if they are loose.

3. Is the O-ring of the material cylinder piston damaged? If damaged, please replace it.

3. The piston of the material cylinder of the filling machine does not come back after being pushed to the top:

The position of the movable magnetic switch, press the emergency stop switch, and adjust the movable magnetic switch from the beginning.

与此原文有关的更多信息要查看其他翻译信息，您必须输入相应原文

发送反馈

侧边栏